Lian Li Case
Lian Li Case 1
Lian Li Case 2
1/2
دولار105سعر ثابت

Lian Li Case

جديدالسليمانية·نُشر 12‏/11‏/2026
Hawranj Storeمتجر موثّق
السليمانية

التفاصيل

النوع
حافظة
الماركة
Lian Li

الوصف

Bring flexible layouts and easy cooling to your next build with the LANCOOL 216 RGB Mid-Tower Case in black from Lian-Li. Supporting ATX, Micro-ATX and Mini-ITX motherboards, this case also fits E-ATX boards up to 11.02". Install up to six 2.5" and two 3.5" drives. Seven expansion slots accommodate various adapter cards, including GPUs up to 15.43"; vertical GPUs are supported via a riser cable, available separately. This mid-tower case also supports CPU coolers up to 7.11" and ATX PSUs up to 8.66". Preinstalled with a 140mm PWM fan and two 160mm RGB fans, this case supports up to 10 cooling fans and features a SATA-powered fan hub. Or, install a liquid cooling setup thanks to a flexible case design and support for radiators up to 360mm at the top and front of the case. A removable top radiator bracket allows for easy access to components, while a dedicated cable management space helps keep your build looking organized. Keep internals on full display via a tempered glass side panel. A front I/O panel sports a combo audio jack and a USB-C and two USB-A 3.0/3.1 Gen 1 ports and can be positioned at the top or bottom side of the front panel. Front to Top Mesh To ensure adequate airflow is provided to the system, the LANCOOL 216 RGB features mesh at the front and top of the case, as well as on the PSU shroud's side. The front mesh extends to the top for a continuous mesh panel. Please note, the mesh panel beside the PSU shroud chamber is removable but is also an integral part of the support mechanism for the side tempered glass panel. RGB Fans RGB Fans Fan Hub Located in the chamber behind the motherboard, a SATA-powered fan hub supports up to four ARGB and PWM fans. Flexible Cooling The modular motherboard I/O allows users to move the motherboard to a higher position more favorable for air-cooled systems or a lower position for liquid-cooled systems. Set higher for air cooling, the motherboard leaves room above the PSU shroud for wider fans Set lower, the motherboard leaves a 2.48" gap at the top to install radiator and fan combos, ideal for All-in-One coolers or custom setups Relocate Front I/O Ports Front I/O ports include power and reset buttons, plus an audio jack, one USB-C port, and two USB-A 3.0/3.1 Gen 1 ports. These ports can be relocated to the lower left side of the front panel. Wide Compatibility The LANCOOL 216 RGB supports ATX, Micro-ATX, and Mini-ITX motherboards, as well as E-ATX boards under 11.02" when the grommet bar is flipped 180°. Thanks to a symmetrical design, cable management in the 2nd chamber remains unaffected for easy building. Ready for Large GPUs With enough room for graphics cards up to 15.43" in length and up to 7.09" in height in air cooling setups, the LANCOOL 216 RGB is compatible with large graphics cards, including NVIDIA 4000 series cards. Leak Free Preinstalled at the front of the top radiator bracket, a seal plate ensures no pressure leak is created when installing radiators smaller than 360mm or air cooling options with footprints smaller than three 120mm fans. Removable Top Radiator Bracket The top mounting bracket can be completely removed from the case for easier hardware installation. The bracket comes off with the left side frame bar to provide optimal clearance. Two grooves have been implemented to allow easy passage of fan cables into the second chamber of the case, simplifying cable management and allowing for a cleaner overall look. PCIe Fan Bracket The GPU placed at the top of the expansion slots in air cooling mode opens up the possibility to add a 120mm fan at the rear of the case without obstructing the GPU I/O. This is also possible with a vertically mounted GPU in both air-cooled and liquid-cooled mode. The additional 120mm fan provides better cooling for the GPU and a greater balance between intake and exhaust for your system. Vertical GPU Compatible The PCIe expansion slot panel can be rotated to accommodate vertical GPUs via a riser cable, available separately. Ample Storage Two drive bays provide space for two 2.5" SSDs and two 3.5" drives. Plus, mount up to four 2.5" SSDs via two additional mounts on the PSU shroud and two on the back of the motherboard tray. Please note, the 2.5" drive mounts on the PSU shroud can be used to mount cooling fans instead. Cable Management The LANCOOL 216 RGB offers multiple options for easy cable management. Along the cable grommet bar, three large Velcro straps can hold two different sets of cables. Three small clips are located along the rear side panel, ideal for cleanly routing the 8-pin CPU cable, and two additional Velcro straps are located near the PSU chamber to help hold down the extra PSU cable length away from the ventilation path in the bottom chamber. Optional Accessories ARGB Control and USB Module An ARGB control and USB module can be installed at the side of the front panel to provide better control over front ARGB fans. The ARGB control and USB module allows you to cre

التعليقات

اسأل سؤالاً أو شارك معلومة مفيدة عن هذا المنتج.

سجّل الدخول للمشاركة في المحادثة

مرئي للجميع. اجعل مشاركتك مفيدة ومحترمة.

تسجيل الدخول
جارٍ التحميل…